1. Nitrocellulose wood paint dries quickly, has soft luster, good touch, easy construction, and low price. In particular, the dried coating film does not contain toxic substances.
2. Nitrocellulose clear topcoat has light color, good fullness and good leveling properties. It is most suitable for painting light-colored wood. When used, good results can be achieved if the technology is properly matched.
What is NC（Nitrocellulose） paint？
NC wood paint stands for Nitrocellulose wood paint. It is a type of wood coating that is based on nitrocellulose resin. This type of paint is commonly used in the furniture industry for finishing wood surfaces.
NC wood paint is known for its quick drying time and ease of application. It provides a smooth finish and good durability, making it a popular choice for wood furniture, cabinets, and other wooden surfaces. However, NC wood paint may contain volatile organic compounds (VOCs), so proper ventilation is necessary when working with this type of paint.
Specification
|
Base Material |
Oil Based |
|
Coverage |
110- 130 sq. ft. |
|
Substrate Condition
|
Bare Wood, Finished Wood, Old/Reclaimed Wood, Stained Wood, Unfinished Wood |
|
Package |
3.5kg/20kg |
|
Color (after curing) |
White and other solid color ,In addition to regular colors, we can also customize the colors you want |
|
Dry time |
Dry dust free :10 min Imprint free :1-1.5h Packing time: 8 -12h |
|
Shelf life |
12 months |
|
Suitable spraying method |
Spray or Brush |
|
Ratio |
Paint :Thinner 100:100-150 |
Step
Sand with 320 and 400 grit until obtaining a uniform surface, always in the direction of the grain.
2.Application if the white color or the transparent primer -(NC undercoat)
The background is the layer of varnish that will build the base of the finish, providing a uniform surface. We will use a colorless background if the color that we are going to use shows the grain of the wood or a white background if we want a solid color.
We will sand with 600 grain between coats. Minimum application of 2 coats is recommended. We will apply the product until we see that there are no imperfections, it is perfectly level and the pore of the wood is completely closed.
3.Sanding to flat surface,Start Spray topcoat
We apply layers of color by sanding between them with 600, allowing it to dry 24 hours between coats.
In the case of solid colors, it is recommended to apply a minimum of 2 layers, until the entire background is covered and we see that the color is completely uniform.
If the color is translucent, we will apply layers of product until we achieve the desired intensity.
In either case, be especially careful when sanding the first layers of color to avoid peeling. And especially in translucent colors to avoid color differences.
4.Finish!
Application
including floors, doors, furniture and more.
FAQ
Transportation conditions: temperature 5 ~ 40°C，storage conditions: 5 ~ 35°C。
Store in a cool, dry and ventilated place, away from sunlight, rain, high temperature or freezing.
Exceeding the specified temperature will shorten the storage period.
Please keep unused paint in a sealed container and keep it out of reach of children and other unrelated persons.
Never pour this product down drains or drains. Disposal of this product must comply with local environmental regulations.
